The body of processing unit has been very precisely made of aluminum alloy with regard to its possibly smallest size and shape allowing easy placing to all harness types. Thanks to this, it is very resistant to pressure and hard impacts. In addition, it provides waterproofing independently on the filter placed in the forehead between the cable passages.
The control unit is marked by the m² multi logo on the upper side and an identification label with production data is placed on the back.
The body of the control unit is made of stainless steel and is connected to the processing unit with a flexible cable. The control unit has a display for displaying of icons and a single control button. The control unit is very well protected against the pull of magnet and possible electric shocks.
The control unit enables the device to be switched on/ off, as well as a complete device setup:
Scale – settings meter/ ft
Profile – five different profile types (Stu, Int, Pro, Cpi, Tan )
Adjust – allows you to increase the activation altitude every 30 meters A1 to A9
Offset – the temporary setting of a landing zone at a different altitude than the place of start of the airplane (calibration of m² Multi-device) Setting range +/ – 999m
Info – input is possible from both the device turned on and off, it displays important information and data for individual jumps and to a specific device
d) – opening altitude of the last jump
j) – total number of jumps
G) – percent view of trigger speed on a functional main canopy
b) – remaining battery capacity
L) – remaining days of the lifetime of the device
n) – serial number of device
r) – firmware version
Y) –year and month of production
P) –current barometric pressure
Cutting unit – cutter
Service / Battery / Maintenance